<menuitem id="zhnrb"></menuitem>
<menuitem id="zhnrb"></menuitem>
<span id="zhnrb"></span><var id="zhnrb"><dl id="zhnrb"><th id="zhnrb"></th></dl></var><dl id="zhnrb"></dl><var id="zhnrb"></var>
<var id="zhnrb"><dl id="zhnrb"><address id="zhnrb"></address></dl></var>
<menuitem id="zhnrb"></menuitem>
<menuitem id="zhnrb"></menuitem>
<menuitem id="zhnrb"><ruby id="zhnrb"></ruby></menuitem>
<menuitem id="zhnrb"></menuitem><var id="zhnrb"><ruby id="zhnrb"><th id="zhnrb"></th></ruby></var>
<thead id="zhnrb"></thead>
<thead id="zhnrb"><ruby id="zhnrb"></ruby></thead>
<menuitem id="zhnrb"></menuitem>
<menuitem id="zhnrb"><ruby id="zhnrb"></ruby></menuitem>
<menuitem id="zhnrb"><ruby id="zhnrb"></ruby></menuitem>
<thead id="zhnrb"><del id="zhnrb"><span id="zhnrb"></span></del></thead>
<thead id="zhnrb"></thead>
<menuitem id="zhnrb"></menuitem>
<menuitem id="zhnrb"><ruby id="zhnrb"><noframes id="zhnrb"> <menuitem id="zhnrb"><ruby id="zhnrb"></ruby></menuitem>
<var id="zhnrb"><dl id="zhnrb"><address id="zhnrb"></address></dl></var>
<thead id="zhnrb"><del id="zhnrb"></del></thead>
<thead id="zhnrb"><i id="zhnrb"></i></thead>
  • 技術文章ARTICLE

    您當前的位置:首頁 > 技術文章 > 阿托斯比例閥帶調節閥工作情況匯總

    阿托斯比例閥帶調節閥工作情況匯總

    發布時間: 2020-01-03  點擊次數: 961次

    阿托斯比例閥帶調節閥工作情況匯總,感興趣的客戶都可以在線和我們咨詢!日常工作上有遇到問題都可以反饋給我們,不清楚的地方都可以詳細聊聊!

    下面是整理的一些情況!

    調節閥出現故障

    調節閥現場常見問題是閥不動作、震蕩、振動、動作遲緩、泄漏量大,下面逐個對這些故障進行分析:

    1.閥不動作

    一種現象是無氣源、無信號,造成這種現象的原因主要有一下3個方面:氣源未打開或氣源壓力太少;氣源含有雜質導致氣源管或過濾器、減壓閥堵塞;過濾器減壓閥堵塞或故障。

    第二種現象有氣源、無法動作,此時需要根據故障現象進行相應的檢修處理:

    (1)現象:DCS 指令信號無輸出,此時需要檢查相應的指令線;

    (2)現象:定位器無顯示、無輸出:此時需要更換定位器;

    (3)定位器氣路輸出泄露:則需要進行焊接工作消除泄露現象;

    (4)現象:閥桿或閥芯卡澀、變形:此時需根據實際損壞情況進行處理或更換;

    (5)現象:手輪位置不對:此時需要將手輪調節到釋放位置。

    2.調節閥震蕩

    當氣源壓力滿足要求,指令信號也穩定,但調節閥的動作仍不穩定時,首先需要檢查定位器位置是否正確,并進行相應處理;其次檢查定位器自身是否發生故障:若定位器發生故障需要檢修或者更換定位器;此外,檢查定位器輸出管路是否漏氣,消除漏氣現象;后檢查閥桿運動與接觸部分是否順暢,若不順暢則需要加潤滑劑或重新安裝閥桿。

    3.調節閥振動

    此時可按照故障現象進行相應處理:安裝底座不穩:加固底座;附近有振動設備引起:消除振源;閥芯與襯套磨損嚴重:更換襯套;調節閥選型不對:更換合適的閥門;閥門介質流向與關閉方向相反:改變閥安裝方向。

    4.調節閥動作遲緩

    此時可按照故障現象進行相應處理:氣動薄膜執行機構中膜片破損泄漏:更換膜片;執行機構中O型圈破損:更換O 型密封圈;閥體內有粘物堵塞:消除堵塞;閥桿不直導致摩擦阻力大:處理閥桿。

    5.調節閥泄漏量大

    此時可按照故障現象進行相應處理:閥芯被磨損,內漏嚴重:消除內漏;閥杠長短不合適,閥未調好關不嚴:調整閥桿,調整閥;閥體內密封環壞:更換密封環;介質壓差太大,執行機構關不嚴:增大氣源,改進執行機構;閥內有異物:清除異物;氣源壓力低或接頭氣管漏氣:調整氣源,消除泄漏。

    有更多阿托斯比例閥產品信息都可以關注我們的發布!

    型號的供應:

    ATOS放大器ESP-RI-AE-05F
    ATOS電磁換向閥DHU-0713P/18
    ATOS液壓閥HG-031/32/23
    ATOS比例閥E-RI-LEB-N-NP-01H/Q 10+DLHZO-LEBQP-SN-NP-060-V31/Q 10  + LIQZO-LE-322L 4/Q
    ATOS電磁閥11X0265 SDHE-0631/2/A
    ATOS電磁閥SDKE-1713 10S 220VAC
    ATOS電磁閥DKE-1631/2 X DC24V
    ATOS繼電器MAP-320
    ATOS比例閥AGMZO-A-10/210
    ATOS繼電器MAP-320(20)
    ATOS電磁換向閥DHI-0751/2P24
    ATOS比例溢流閥RZMO-REB-P-NP-010/210/I

產品中心 Products
在線客服 聯系方式

服務熱線

13795313415(微信同號)

<menuitem id="zhnrb"></menuitem>
<menuitem id="zhnrb"></menuitem>
<span id="zhnrb"></span><var id="zhnrb"><dl id="zhnrb"><th id="zhnrb"></th></dl></var><dl id="zhnrb"></dl><var id="zhnrb"></var>
<var id="zhnrb"><dl id="zhnrb"><address id="zhnrb"></address></dl></var>
<menuitem id="zhnrb"></menuitem>
<menuitem id="zhnrb"></menuitem>
<menuitem id="zhnrb"><ruby id="zhnrb"></ruby></menuitem>
<menuitem id="zhnrb"></menuitem><var id="zhnrb"><ruby id="zhnrb"><th id="zhnrb"></th></ruby></var>
<thead id="zhnrb"></thead>
<thead id="zhnrb"><ruby id="zhnrb"></ruby></thead>
<menuitem id="zhnrb"></menuitem>
<menuitem id="zhnrb"><ruby id="zhnrb"></ruby></menuitem>
<menuitem id="zhnrb"><ruby id="zhnrb"></ruby></menuitem>
<thead id="zhnrb"><del id="zhnrb"><span id="zhnrb"></span></del></thead>
<thead id="zhnrb"></thead>
<menuitem id="zhnrb"></menuitem>
<menuitem id="zhnrb"><ruby id="zhnrb"><noframes id="zhnrb"> <menuitem id="zhnrb"><ruby id="zhnrb"></ruby></menuitem>
<var id="zhnrb"><dl id="zhnrb"><address id="zhnrb"></address></dl></var>
<thead id="zhnrb"><del id="zhnrb"></del></thead>
<thead id="zhnrb"><i id="zhnrb"></i></thead>
芦山县| 五家渠市| 周宁县| 新干县| 旬阳县| 武鸣县| 安塞县| 磴口县| 贞丰县| 邹平县| 苍梧县| 汕头市| 永平县| 白朗县| 利津县| 固原市| 五原县| 南陵县| 林州市| 丘北县| 舞阳县| 班玛县| 铜陵市| 盘山县| 太保市| 东丰县| 合山市| 衡阳县| 淮南市| 麦盖提县| 密山市| 巴林右旗| 福鼎市| 闵行区| 上虞市| 赣州市| 固始县| 灵石县| 全州县| 城固县| 安西县| http://444 http://444 http://444 http://444 http://444 http://444